Gs500K3 ('03-Model) Wire Routing - Suzuki GS500E Service Manual

19-28 GS500K3 ('03-MODEL)
WIRE ROUTING
Clamp
Clamp
Wiring harness
Neutral switch lead wire
Regulator lead wire
Clamp
Regulator
Pass the turn signal
light lead wire between
the frame and rear fender.
No slack.
Side stand relay
Pass the lead wire
underneath the frame.
Clamp
Clamp the wiring harness at
bule tape on the wiring harness.
Clamp
Make clearance between the helmet
holder and wiring harness.
No slack
Starter relay
Clamp
Clamp
Side stand switch
coupler must be located
over the starter relay
coupler.
Turn signal relay
Rear brake light switch
Clamp
Ignition coil lead wire
Clutch cable
Throttle cable
Make clearance
between the wiring
harness and fuel
tank bracket.
Clamp
Clamp
TPS
Solenoid
Air cleaner box
Clamp
Ignition coil, left
Clamp
Ignition coil, right
Spark plug cap
Pass the combination
meter lead wire above
the handlebar switch
lead wires.
A
Pass the solenoid lead wire
between the air cleaner box
and solenoid.
Side stand switch
B