Gs500K3 ('03-Model) Ignition System Description - Suzuki GS500E Service Manual

IGNITION SYSTEM
DESCRIPTION
The fully transistorized ignition system consists of a signal generator, ignitor unit, ignition coils and spark
plugs.
The signal generator mounted at the right end of the crankshaft comprises the rotor tip and pickup coil.
The induced signal in the signal generator is sent to wave-form arrangement circuit, and CPU receives this
signal and calculates the best ignition timing from the signal of ceramic vibrator. The CPU outputs signal to
the transistor of the I. G. coil output circuit which is connected to the primary windings of the ignition coil
which is turned OFF and ON accordingly, thus it induces the secondary current on the ignition coil second-
ary windings and produce the spark between spark plug gaps.
Ignitor
Br
B/Bl
Signal generator
WIRE COLOR
B : Black
Bl : Blue
Br : Brown
R : Red
W : White
B/Bl : Black with Blue tracer
B/Y : Black with Yellow tracer
B/W : Black with White tracer
G/Bl : Green with Blue tracer
O/W : Orange with White tracer
R/B : Red with Black tracer
Ignition power
source circuit
Wave-
form
CPU
arrange-
ment
( Central
circuit
Processing
Unit
B/W
B Bl R
Throttole
position
sensor
(For GS500H)
O/W
Ceramic vib
W
)
B/Y
O/W
Solenoid
GS500K3 ('03-MODEL)
Engine
Side-stand
stop
relay
switch
Ignition coil
valve
19-17
Ignition
switch
Fuse
(20 A)
Battery
(12 V)