Swann SwannEye User Manual page 31

SwannEye IP Camera
Encryption: The camera supports WEP, WPA and WPA2 encryption to protect the
data being transmitted between your PC and the camera. You need to match
which encryption you use on the camera to what you are using on your router.
If you select the wireless network from the list, the fields will be pre-filled with the
correct type of encryption. You only need to enter the password (share key) for
that wireless network.
Share Key: Enter the password for the wireless network you are trying to connect
to.
We strongly recommend you use WPA2 if available as it is more secure than
WPA/WEP. Most modern routers support WPA2.
If you select WEP as your encryption method under 'Encryption, ' the following
additional fields will appear.
Authentication: Choose between Open System or Share Key.
Key Format: Choose between 'hexadecimal number' or 'ascii character' .
Default TX Key: Select which of the four possible keys entered below should be
active.
Key 1/bits: Enter a password key and chose whether it should be 64 bits or 128
bits.
Key 2: Enter an additional key as per Key 1.
Key 3: Enter an additional key as per Key 1.
Key 4: Enter an additional key as per Key 1.
Remember: Click 'Submit' to save your changes.
31