Table of Contents
Advertisement
SwannEye IP Camera
8.3.
Camera Controls
The
camera
control
Operators and Administrators) gives
the user all the functions of visitor
access plus the ability to control the
movement of the camera through pan/
tilt. Operator access does not allow the
user to adjust any of the Administrator
settings however Administrators do
have access to Operator functions.
Note: To recall the function of any
item, hover the mouse pointer over an
item and a pop-up label will appear.
PTZ Control pad: Use the control pad to adjust the Pan/Tilt (where
1.
applicable) of the camera. You can click on the directional pad to move the
camera up/down and left/right. Press the Center button (curled arrow) to
return the camera to its original direction.
Vertical Patrol / Stop Vertical Control: Click 'Vertical Patrol' to start
2.
the camera patrolling in an up and down movement. Click 'Stop Vertical
Control' to stop patrolling.
3.
Horizontal Patrol / Stop Horizontal Control: Click 'Horizontal patrol'
to start the camera patrolling in a left and right movement. Click 'Stop
Horizontal Control' to stop patrolling.
Mirror: Check the box next to this icon to flip the image on the screen
4.
horizontally. This is best used to re-orient the image the right way up if you
mount the camera upside down from a ceiling.
Vertical Flip: Check the box next to this icon to flip the image on the screen
5.
vertically.
panel
(for
1
2
3
5
6
7
8
9
10
11
12
4
23
Advertisement
Table of Contents
