Table of Contents
Advertisement
AUX FUNCTION
General Information
The
AUX
send a preset message to a pager (see PAGER FEATURE section for pager operation).
Ask your installer which function has been assigned for your system.
AUX
If programmed for the AUX function, you can use the
to 20 keystrokes that have been stored in the system's memory. Typical functions
include:
• Seldom used but repeatable sequences
• Arming sequences that involve bypassing zones before arming
• Device activation sequences
Defining the AUX Function
The system must be disarmed before defining a function.
1. Enter Master Code + # +
2. Press the desired command sequence, up to 20 keystrokes. Press the
between each command in the sequence.
3. Press the
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the
following string:
Master Code + # +
Note that the
Performing the AUX function
Press and hold down the
security code. The defined function will begin.
key may have been programmed to either perform a predefined function or to
Key:
PRE-DEFINED FUNCTION
key twice to end the definition.
AUX
(hold until 4 beeps sound), then 6 10 11 AUX AWAY 0 AUX AUX
AUX
key is included in the 20 keystroke maximum.
AUX
AUX
(hold down until 4 beeps sound).
AUX
key at least 2 seconds until 4 beeps sound, then enter your
– 20 –
PAGING FUNCTION
key to activate a string of up
AUX
key
AUX
Advertisement
Table of Contents
