Elation Professional Level Q7 IP User Manual page 21

FuncMode - SetSlave
Define the fixture as slave.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3 Press the UP/DOWN buttons until "SetSlave" is displayed and press ENTER.
4 Press the UP/DOWN buttons to select desired value (Slave 1, Slave 2, Slave 3).
5 Press ENTER to confirm selection.
FuncMode - AutoProg
Define the fixture mode (= Master, = Alone) for running Auto Programs. Select the desired
internal programs under "Sel Prog", set the number of steps under "Edit Prog", and edit
the individual scenes under "Edit Scen".
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3 Press the UP/DOWN buttons until "AutoProg" is displayed and press ENTER.
4 Press the UP/DOWN buttons to select desired value (=Master, =Alone).
5 Press ENTER to confirm selection.
Info - TimeInfo - Cur Time
Display the run time of the fixture from the last power ON.
The counter is reset after turning the device off.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until "Info 2" is displayed and press ENTER.
3 Press the UP/DOWN buttons until "TimeInfo" is displayed and press ENTER.
4 Press the UP/DOWN buttons until "Cur Time" is displayed and press ENTER and
the display will show "XXXh" (hours).
5 Press MODE/ESC to return to previous menu or display will automatically exit.
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 21
w w w . e l a t i o n l i g h t i n g . c o m !
LEVEL!Q7!IP
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
User!Manual!1.0
™!