Elation Professional Level Q7 IP User Manual page 20

SelProg
EditProg
EDITPROG
Edit Scen
RecCntrl
FuncMode - Address
Adjust the desired DMX-address via the Control Board.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3 Press the UP/DOWN buttons until "Address" is displayed and press ENTER.
4 Press the UP/DOWN buttons to select desired DMX address.
5 Press ENTER to confirm selection.
FuncMode - ValuDisp
Display the DMX 512 value of each channel.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until "FuncMode" is displayed and press ENTER.
3 Press the UP/DOWN buttons until "ValuDisp " is displayed and press ENTER.
4 Press the UP/DOWN buttons to select desired value (All Ch, Auto, Red, Gree,
Blue, Whit, Stro, Dimm, Macr, Temp).
5 Press ENTER to confirm selection.
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 20
ProPart1 Prog 1 ~ 10
ProPart2 Prog 1 ~ 10
ProPart3 Prog 1 ~ 10
Prog 1 ~ ProgTest,
: EdStep01
Prog 10 ~EdStep64
Auto.....
Scen 001 ~
--ScenTime
Scen 250
InByOut
XX ~ XX
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
w w w . e l a t i o n l i g h t i n g . c o m !
Select Programs
To Be Run
T01SCxxx Testing Program
S01SCxxx Program In Loop
S64SCxxx Save And Exit
Auto=xxx.. Save And Automatically
Red=xxx.. Return
TIME=xx.x Manual Scenes Edit
Automatic Scenes
Recorder
LEVEL!Q7!IP
User!Manual!1.0
™!