Enjoying Sound From All Speakers And Various Sound Effects; Enjoying Surround Sound Effects; Changing The Sound Modes; Adjusting Speaker Level During Play - Panasonic SC-BT207 Operating Instructions Manual

Enjoying sound from all speakers and
various sound effects
≥The following sound effects/modes may not be available or have no effect with some sources, or when headphones are used (
≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
SURROUND
-CH SELECT

Enjoying surround sound effects

Available surround sound effects
Effect
STANDARD: Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH: You can enjoy sound from the front speakers, as well
as the surround speakers even when playing a
2-channel sound or non-surround sound.
MANUAL: – DOLBY PL II MOVIE:
Suitable for movie software, or the one recorded in
Dolby Surround. (except [DivX])
– DOLBY PL II MUSIC:
Adds 5.1-channel effects to stereo sources.
(except [DivX])
– S.SURROUND:
You can enjoy sound from all speakers with stereo
sources.
– 2CH STEREO:
You can play any source in stereo. Sound will be
output to the front speakers and the subwoofer
only.
Press [SURROUND] several times to select the effect.
≥You can also press [SURROUND] and then [3, 4] to select the
mode.
≥The selected effect will only be displayed on the main unit.
When selecting the MANUAL effects.
While "MANUAL" is displayed
Press [2, 1] and select the desired effect.
≥"NOT CONDITIONAL" is displayed on the main unit if the setting is
not active.
≥"DOLBY PL II MOVIE" and "DOLBY PL II MUSIC" do not work when
audio is output from the HDMI AV OUT terminal.
RQT9483
18
SURROUND SOUND
SOUND
OK
-CH SELECT
Setting

Changing the sound modes

Available sound modes
Mode
EQ: You can select sound quality settings.
(Equalizer) – FLAT(Flat):
– HEAVY(Heavy): Adds punch to rock.
– CLEAR(Clear): Clarifies higher sounds.
– SOFT(Soft):
SUB W: This unit will change the settings for the amount of
(Subwoofer bass depending on the source.
level) However you can also adjust the amount of bass for
the source being played.
– 1 (Weakest effect)
– 2
– 3
– 4 (Strongest effect)
≥The setting you make is retained, and recalled
every time you play the same type of source.
CF: (Effective when playing audio containing center
(Center channel sound.)
Focus) You can make the sound of the center speaker seem
like it is coming from within the TV.
– ON
– OFF
W.S.: (Effective when playing video with 5.1ch audio.)
(Whisper- You can enhance the surround effect for low volume
mode 5.1-channel sound.
Surround) (Convenient for late night viewing.)
– ON
– OFF
1 Press [SOUND] several times to select the mode.
≥You can also press [SOUND] and then [3, 4] to select the
mode.
≥The selected effect will only be displayed on the main unit.
2
While the selected mode is displayed
Press [2, 1] and select the desired setting.

Adjusting speaker level during play

1 Press and hold [-CH SELECT] for 3 seconds to
activate the speaker setting mode.
2 Press [-CH SELECT] several times to select the
speaker.
Each time you press the button:
L R—) C_) RS_) LS_) SW
^"""""""""""""""""""b
L R: Front speaker (left and right)
C: Center speaker
RS: Surround speaker (right)
LS: Surround speaker (left)
SW: Subwoofer
≥The channels not included in the playing audio will not be
displayed (subwoofer is displayed even if it is not included).
Adjusting the balance of the front speakers
(When "L R" selected)
3 Press [2, 1] to adjust the balance of the front
speakers.
Adjusting the speaker level
(When other speakers are selected)
4 Press [3] (increase) or [4] (decrease) to adjust
the speaker level for each speaker.
s6 dB to r6 dB
19).
Setting
Cancel (no effect is added).
For background music.