Speaker Connections - Panasonic SC-BT207 Operating Instructions Manual

Speaker connections

Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Wireless system
Setup example
1
Speaker cable for center
speaker (Green)
≥Don't use a front speaker as a surround speaker or vice versa. Verify the type of speaker with label on the rear label of the speaker
before connecting the appropriate cable.
≥Pay attention to the type of speaker and the connector colour when you place the speakers.
Digital transmitter
Insert fully until you hear a click.
DIGITAL
DIGITAL
TRANSMITTER
TRANSMITTER
Main unit
PURPLE GREEN
SUBWOOFER CENTER
1
SPEAKERS
6 2 1 4 3
5
3 Ω
3 Ω 3 Ω 3 Ω
SUB-
R L R L
WOOFER
CENTER FRONT SURROUND
Main unit
Do not connect the surround
speaker cables to the main unit
when using the wireless system*
Connect to the terminals of the same colour.
Use of the speaker cable stickers is convenient when making cable connections.
≥Match the connector colour and the type of speaker as shown above.
≥Extending the speaker cables may damage the speakers and sound quality will negatively be affected.
*1 Disconnect the surround speaker cables from the wireless system and connect them to the main unit if you do not want to use the
NOTE
wireless system.
SPEAKERS
AC IN
6 5
3 Ω SUB- 3 Ω
WOOFER CENTER
Main unit
Sheet of speaker cable
stickers
RED WHITE BLUE
FRONT FRONT SURROUND
(R ch ) (L ch ) (L ch )
SPEAKERS
ENCEINTES
LS / RB LB /
+
-
SURR
SURROUND (3 - 6 Ω)
L R
SIDE SIDE AMBIOPHONIQUES
Wireless system
Surround selector
The surround selector switch must be set in the center position.
.
1
AUX(TV)
Y P
B
OPTICAL
+
-
P 2(STB)
R
VIDEO COMPONENT
2 1 4 3 OUT VIDEO OUT
AV OUT DIGITAL IN
3 Ω 3 Ω
R L R L
FRONT SURROUND
Do not insert or remove the digital transmitter while the main
unit is on.
e.g. Front speaker (L)
Speaker cable sticker (included)
e.g.
GREY
SURROUND
(R ch )
RS
Surround speaker (R)
DIGITAL
TRANSMITTER
1(TV)
75Ω LOOP EXT
FM ANT AM ANT
LOOP ANT GND
FRONT
Lch
1
Insert the wire fully,
taking care not to insert
beyond the wire
insulation.
: White
: Blue
Push!
Be careful not to cross
(short circuit) or reverse
the polarity of the
speaker wires as doing
so may damage the
speakers.
DO NOT
RQT9483
9