Component Video Connection; Digital Audio Output Connection - Emerson LC260EM2 Owner's Manual

26
Note
• Use an HDMI cable with the HDMI logo (a certified HDMI cable).
High Speed HDMI cable is recommended for the better
compatibility.
For HDMI connection (use HDMI 1 or 2 Input jack)
• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/30/60Hz
of video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.
• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2
channel audio signal (LPCM).
• This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate audio connections as
well and the audio signals are converted from digital to analog.
• DVI does not display 480i image which is not in compliance with
EIA/CEA-861/861B.

Component Video Connection

Component Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit's Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks right below the Component Video connector jacks.
Note
• The unit accepts 480i / 480p / 720p and 1080i of video signals for
this connection.
component video cables
(red / blue / green)
audio cables
(green) (blue) (red)
AUDIO OUT
COMPONENT VIDEO OUT
L R Y Pb/Cb Pr/Cr
TITLE 5
CHAPTER 15
REPEAT A-B
Blu-ray / DVD recorder
with the component video output jacks
Composite Video Connection
Composite Video connection offers standard picture quality
for video devices connected to the unit. If you connect to the
unit's Composite Video Input jack (VIDEO), connect audio
cables to the Audio L/R Input jacks below the Composite
Video connector jack. When the Audio is monaural, then only
connect to the Audio L Input jack.
video cable
Note
• Whenever you connect to the Composite Video Input jack (VIDEO),
you must disconnect the Component Video Input jacks (Pb and Pr).
If you leave those jacks connected, it may cause of unstable picture.

Digital Audio Output Connection

(for digital broadcasting only)
If you connect this unit to an external digital audio device, you
can enjoy multi-channel audio like 5.1ch digital broadcasting
sound.
Use a digital audio coaxial cable to connect the unit to
external digital audio devices.
digital audio coaxial cable
camcorder video game
STAND-BY
STEREO
VCR
VIDEO
AUDIO OUT
OUT
L R
audio cables
DIGITAL AUDIO
COAXIAL IN
Dolby Digital
decoder