Connecting Devices; External Device Connection - Emerson LC260EM2 Owner's Manual

Note
• The unit recognizes only a USB storage device.
• Do not use a USB hub or an extension cable to connect an
external hard disk drive to the unit. (Not supported.)
• A USB storage device is always inserted to this unit directly.
• A USB storage device is not supplied with this unit.
• We do not guarantee that all USB storage devices can be
supported by this unit.
• Be sure to keep a backup copy of the original files on your device
before you play them back on this unit. We have no responsibilities
for damage or loss of your stored data.
• To protect your USB storage device files from being erased place
the write protect sliding tab in the protect position.
• When you are ready to remove a USB storage device, at first turn
the unit off so it will go into standby mode to avoid any damage
to your data and the unit.
• A USB storage device that requires its own driver or the device
with a special system such as fingerprint recognition are not
supported.
• This unit is not allowed to use the USB storage device which
requires an external power supply (500mA or more).
• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
• Up to 10,000 files or 1,000 folders with 19 hierarchies can be
recognized.
• Up to 255 English characters can be recognized.
• This unit does not support MTP(Media Transfer Protocol).
• This unit supports FAT16 and FAT32 file systems.
• If the file is not supported, an error message appears.
• When the USB storage device is not recognized, try reconnecting
it again.
• Motion JPEG file with an extension of ".avi" can only be
recognized. An extension of ".mov" is not supported.
• This unit doesn't support "pause", "forward" or "reverse" during
video (Motion JPEG) playback.
The files recorded under the following specifications are required.
<Picture (JPEG)>
• Upper limit : 24 Megapixel
<Video (Motion JPEG)>
Video • Size : 320 x 240 (QVGA)
• Frame rate : 30 fps
Audio • LPCM - Sampling frequency
(32 kHz, 44.1 kHz or 48 kHz)
- Quantization bit rate (16 bit)

CONNECTING DEVICES

No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Before you connect:
Be sure other device is connected properly before plugging in
the AC power cord.

External Device Connection

HDMI Connection
HDMI connection offers the highest picture quality.
HDMI
(High-Definition Multimedia Interface)
digital video and multi-channel digital audio through a single cable.
or
HDMI-DVI Connection
This unit can be connected to your device that has a DVI
terminal. Use an HDMI-DVI conversion cable for this connection
and it requires audio cable for Analog Audio signal as well.
To HDMI 1 Input
jack only
English
transports high definition
HDMI cable
HDMI OUT
TITLE 5
CHAPTER 15
REPEAT A-B
Blu-ray / DVD recorder
with the HDMI output jack
cable receiver or satellite box with
the DVI output jack
STEREO
PCM
AUDIO OUT
DVI OUT
L R
HDMI-DVI
conversion cable
audio cables
25