Symbols - Ryobi RLT30CESA Original Instructions Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME
Safety Alert Symbol
Read Your Operator's Manual
E y e ,
Protection
Keep Bystanders Away
Thrown Objects
No blade
Do not use toothed blade
RPM Decal
Boots
Gloves
No Smoking
Petrol
Lubricant
Mix Petrol and Lubricant
Switch
English (Original Instructions)
H e a d a n d E a r

SYMBOLS

EXPLANATION
Precautions that involve your safety.
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satisfaction and safe use.
Thrown objects can cause severe eye and head injury. Wear eye
protection and helmet when operating this product. Wear hearing
protection during extended period of operation.
Keep all bystanders, especially children and pets, at least 15m
from the operating area.
Thrown objects can cause severe injury. Wear protective
clothing and boots.
Do not install any type of blade on this unit.
This unit is not intended for use with a toothed saw type blade.
Rotational direction and maximum speed of the shaft for the
cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded gasoline intended for motor vehicle use with an
octane rating of 91 ([R+M]/2) or higher.
Use synthetic 2-stroke lubricant for air cooled engines.
Mix the fuel mix thoroughly and also each time before
refuelling.
On/Off Switch
I = ON to Run
O = OFF to Stop
Regulatory Compliance Mark (RCM). Product meets applicable
regulatory requirements.
1