Ryobi RLT30CESA Original Instructions Manual
30cc petrol line trimmer
Hide thumbs
Also See for RLT30CESA:
- Operator's manual (27 pages) ,
- Operator's manual (14 pages) ,
- User manual (224 pages)
Related Manuals for Ryobi RLT30CESA
Summary of Contents for Ryobi RLT30CESA
- Page 1 RLT30CESA 30cc PETROL LINE TRIMMER ORIGINAL INSTRUCTIONS Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine.
- Page 2 English (Original Instructions) SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. NAME EXPLANATION Safety Alert Symbol Precautions that involve your safety.
- Page 3 Your new trimmer has been engineered and manu- prevent entanglement in any moving parts. factured to Ryobi’s high standard for dependability, ease Keep all bystanders, children, and pets at least 15 m of operation, and operator safety. Properly cared for, it away.
- Page 4 Children should be supervised to ensure that they do long term hearing damage, wear hearing protection not play with the product. and keep other persons 15m away from the work SPECIFICATION RLT30CESA Weight (kg) - Without fuel, cutting attachment and harness 5.45 - Without fuel with bump head 5.75...
- Page 5 English (Original Instructions) (m/s 2 ) Uncertainity Noise emission A-weight emission sound pressure level at the operator's position (lawn trimmer/brushcutter) - Idling dB(A) 86.5 - Racing dB(A) 103.4 - equivalent vibration total value dB(A) 100.5 A-weight emission sound power level - Idling dB(A) 91.3...
- Page 6 English (Original Instructions) Place the screws through the front handle and length. securely tighten them into the captive nuts on the Rotate the bump knob on line trimmer head until line bracket. on the centre of the bump knob aligns with arrows on NOTE: Do not attempt to remove or modify the top of line trimmer head.
- Page 7 English (Original Instructions) Do not let petrol or lubricant come in contact with Note: It is normal for smoke to be emitted from a new your skin. engine during and after first use. Keep petrol and lubricant away from the eyes. If WARNING petrol or lubricant comes in contact with the eyes, Always shut off engine before fueling.
- Page 8 Avoid cutting in the dangerous area shown in or maintain this product if you are not qualified to do illustration. so. If in doubt, return to a Ryobi service centre for Use the tip of string to do the cutting; do not force professional assistance.
- Page 9 English (Original Instructions) CLEANING THE AIR FILTER SCREEN (Fig. 9) For proper performance and longer life, keep the air filter screen clean. ■ Remove the air filter cover by pushing down the latch while gently pulling out the cover. ■ Brush the air filter screen lightly. ■ Replace the air filter cover by inserting the tabs of the cover into the slots on the air filter base, then push the cover up until it latches securely in place.
- Page 10 English (Original Instructions) TROUBLESHOOTING IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORISED SERVICE DEALER. PROBLEM POSSIBLE CAUSE SOLUTION Engine will not start. 1. No spark. 1. The spark plug may be damaged, remove it and check for dirt and cracks. Replace with a new spark plug.
- Page 11 English (Original Instructions) PROBLEM POSSIBLE CAUSE SOLUTION Engine starts, runs, and Idle speed screw on carburetor Contact a servicing dealer. accelerates but will not idle. requires adjustment Line will not advance. 1. Line welded to itself. 1. Lubricate with silicone spray. 2.
- Page 12 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 27 Clemow Drive Mt. Wellington, Auckland 1060, New Zealand 960087039-01...