Maintenance Pages; Backup Manager - HP ProCurve 1810G Management And Configuration Manual

Maintenance Pages

Backup Manager

Backup Manager page provides a means to save a backup copy of the switch's image or configuration
files on a local system or network directory. To access this page, click the Maintenance > Backup
Manager.
The page displays different options depending on the protocol and image or file type selected for the
backup. As shown in the example in
as the backup method for saving the code (entire image) onto a server.
Figure 10-1. Backup Manager Page
Table 10-1. Backup Manager Fields
Field
Backup Method
Server IP (TFTP backup only)
File Name (TFTP backup only)
Backup Type
Image Name
Figure 10-1, TFTP (Trivial File Transfer Protocol) has been selected
Description
Select the protocol to use:
• HTTP—The file is downloaded over the current browser session.
• TFTP—This requires a TFTP server operating on the system/network.
If a TFTP backup is to be performed, enter the IP address of the TFTP server.
If a TFTP backup is to be performed, enter the file name with which backup must be
saved. This can differ from the actual file name on the switch.
Select the image or file to be backed up:
• Code—The entire image is backed up (default name switchdrvr.stk).
• Configuration—Only the configuration file is backed up (default name config.bin).
If Code is selected as the Backup Type, select one of the two images stored in memory:
• Active—The currently active image is backed up.
• Backup—The backup image is backed up. name config.bin).
10
10-1