Getting Started With The Web Interface; Logging On - HP ProCurve 1810G Management And Configuration Manual

Getting Started

Getting Started With the Web Interface

Getting Started With the Web Interface
This section describes the following Web pages:
■
■

Logging On

Note
Please use one of the following browsers to access the Web interface:
■
■
■
Follow these steps to log on through Web interface:
1.
2.
Note
To set passwords, see
Figure 1-1. Login Page
1-2
"Logging On" on page 4
"Interface Layout and Features" on page 5
Internet Explorer 6.0, 7.0
Firefox 2.0, up to 3.04
JavaScript must be enabled on the browser to access the Web interface correctly.
Open a Web browser and enter the IP address of the switch in the Web browser address field.
On the Login page, enter the password (if one has been set), and then click Login.
By default, there is no password. After the initial log on, the administrator may configure a
password.
"Password Manager" on page 10-8.