Clock - HP ProCurve 1810G Management And Configuration Manual

Clock

The Clock status page displays the current time, time zone, and Daylight Savings Time settings. To
display this page, click Status > Clock in the navigation bar.
Figure 2-9. Clock Status Page
Table 2-7. Clock Status Fields
Field
Time
Date
Time Source
Time Zone
Acronym
Description
Current Time
The current time. This value is determined by an SNTP server. When SNTP is disabled, the
system time increments from 00:00:00, 1 Jan 1970, which is set at bootup.
The current date.
If the system time is derived from a SNTP server, then "SNTP" displays. If not, then "No time
source" displays.
Time Zone
The time zone configured on the switch.
The acronym configured on the system for the time zone (e.g., PST, EDT).
Status Pages
Clock
2-11