8.6
Connecting the Solaris™ Dome
30
Siemens Building Technologies
Fire Safety & Security Products
1.
Offer the Dome up to the mounting bracket and hook it on to the hinge
mechanism. The hinge should now take the weight of the Dome, leaving your
hand free to make the connection.
2.
Remove the dust cap. It is held to the unit with a lanyard so it will not be
misplaced. Position the dust cap loosely to the side of the bulkhead
connector.
3.
Feed the cable through the opening.
4.
Fit the connector's locking clip to ensure a watertight seal.
5.
Pull the Dome unit into the vertical position (taking care that the cable doesn't
snag) and lock it into place with the fixing screw.
The installation of the Dome is now complete.
08.2006