Using The Srs Wow™ Surround Sound Feature; Using The Dolby Virtual With Srs Trusurround Sound Feature - Toshiba 56MX195 Owner's Manual

Adjusting the audio
Using the SRS WOW™ surround sound
feature
WOW ™ is a special combination of SRS Labs audio
technologies (SRS 3D, FOCUS, and TruBass) that creates a
thrilling surround sound experience with deep, rich bass from
stereo sound sources. Your TV's audio will sound fuller, richer,
and wider.
To adjust the WOW
1. Put the TV in STEREO mode (see "Selecting stereo/SAP
broadcasts" on page 84).
2. Press MENU and open the Audio menu.
3. Highlight Advanced Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
4. Press z or y to highlight the WOW feature you want to
adjust, and then press x or • to adjust the item.
Advanced Audio Settings
WOW: SRS 3D
WOW: FOCUS
WOW: TruBass
Dolby Virtual
TruSurround
Reset
• WOW: SRS 3D — To turn the surround sound effect On
or Off.
Note: If the broadcast is monaural, the 3D effect does not
work.
• WOW: Focus — To turn the vocal emphasis effect On or
Off.
• WOW: TruBass — To select the desired bass expansion
level (High, Low, or Off ).
5. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
• WOW, TruSurround, SRS and
WOW technology is incorporated under license from SRS Labs, Inc.
92
Downloaded from www.Manualslib.com
Chapter 8: Using the TV's features
(continued)
™
settings:
Off
Off
Low
On
Done
symbol are trademarks of SRS Labs, Inc.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
manuals search engine
Using the Dolby Virtual with SRS
TruSurround sound feature
The Dolby ® Virtual surround sound feature allows you to enjoy
virtual surround sound from the TV's speakers.
• If you connect a device (a game console, a DVD player or
a DTV receiver, etc.) with analog audio output to the
standard (analog) audio terminals on the TV, and the input
source is encoded with Dolby Surround
Dolby Digital sound, the Dolby Virtual feature
operates as Virtual Dolby Surround
simulates Dolby Surround sound from the TV's speakers.
To turn on the Dolby Virtual surround sound feature:
1. Press MENU and open the Audio menu.
2. Highlight Advanced Audio Settings and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3. Press y or z to highlight the Dolby Virtual TruSurround,
and then press x or • to select On.
Advanced Audio Settings
WOW: SRS 3D Off
WOW: FOCUS Off
WOW: TruBass Low
Dolby Virtual
On
TruSurround
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To turn off the Dolby Virtual surround sound feature:
Select Off in step 3 above.
Note:
• The Dolby Virtual TruSurround and WOW SRS 3D features cannot
be on at the same time. If you set one to On, the other will
automatically be set to Off.
• The Dolby Virtual TruSurround feature is enabled only when
receiving digital broadcasts.
sound or
(VDS). VDS