Setup/Installation Menu Layout; Navigating The Menu System - Toshiba 56MX195 Owner's Manual

Setup / Installation menu layout
To open the Installation menu (illustrated below), press MENU on the remote control or TV control panel, open the Setup menu,
select Installation, and press ENTER.
From Main Menu/Setup
menu, select "Installation"
sub-menu

Navigating the menu system

You can use the buttons on the remote control or TV control
panel to access and navigate your TV's on-screen menu system.
• Press MENU to open the menu system.
• Use the up/down/left/right arrow buttons (yzx •) on the
remote control or TV control panel to move in the
corresponding direction in a menu.
• Press ENTER to save your menu settings or select a
highlighted item. (A highlighted menu item appears in a
different color in the menu.)
• All menus close automatically if you do not make a
selection within 60 seconds, except the signal meter menu
which closes automatically after 5 minutes.
• To close a menu instantly, press EXIT.
Downloaded from www.Manualslib.com
Chapter 4: Menu layout and navigation
Terrestrial
Devices
Network
TV Guide On Screen™ Setup
Time and Date
System Status
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
manuals search engine
(continued)
Input Configuration [ Input Configuration Window ]
Channel Program ANT1
ANT2
Channel Add/Delete [ Channel Add / Delete Window ]
Signal Meter [ Signal Meter Window ]
IEEE1394 Devices [ IEEE1394 Device Management Window ]
TheaterNet Devices [ TheaterNet Setup Window ]
Basic Network setup
Recording E-mail setup
Home File server setup
Start [ Launches TV Guide On Screen™ system setup ]
Start Setup [ Time And Date Setup Window ]
System Information [ System Information Window ]
TV control panel
MENU
(ENTER*)
y
z
•
x
EXIT
*The MENU button on the TV
control panel functions as
the ENTER button when a
menu is on-screen.
}
[ Scan for new channels on desired Antenna ]
Remote control
MENU
ENTER
y
x •
z
EXIT
41