Akai RE32 Operator's Manual page 54

Multitrack
Hide thumbs Also See for RE32:
Table of Contents

Advertisement

RECORDING
PUNCH MODE
Available selections are :
NORMAL
TRACK KEYS
PRIMED
NOTE: The TRACK KEYS and PRIMED punch modes are only available on 8 track machines
(e.g. DD8, DD8plus). The PUNCH MODE parameter is not shown on this screen if other
machines are being used in the system.
Press EXIT at any time to leave this page and return to the main RECORD screen.
44
This selects how the system will respond if the record track selections
are changed while the transport is in record.
This is the default setting. The record track selections can not be changed
while the transport is in record.
In this mode, the transport responds in the same manner as a
conventional MTR. Pressing the REC and PLAY keys will put the system
into a 'record-ready' condition waiting for tracks to be punched in from
the track select keys. If no tracks are selected at the time the REC and
PLAY keys are pressed, the REC key will flash. In this condition, when
any of the track select keys are pressed the system will punch into record
on the selected track(s) and the REC key will light steadily. When a track
select key is pressed again, that track will be punched out of record.
In this mode, recording will start immediately on selected tracks when
the REC and PLAY keys are first pressed. After this, if new record tracks
are selected, the appropriate track select key(s) will flash indicating that
the track is in 'record-ready', but recording will not actually start until the
PLAY key is pressed again while holding down the REC key. While in
record, pressing the track select key of a track that is actually recording
will punch that track out of record and back into the 'record-ready' state.
Version 1.00

Advertisement

Table of Contents
loading

Table of Contents