Ariens 911150 Operator's Manual page 20

1
6
5
1. Belt
2. Transmission
Input Pulley
3. Idler Return
Spring
Figure 16
1
6
5
1. Blade
2. Drive Belt
3. Engine Pulley
4. Blade
Adapter
Figure 17
2
3
4
4. Wheel Drive
Cable
5. Drive Cable
Spring
6. Idler Arm
2
3
4
5. Bolt, Lock
Washer &
Flat Washer
6. Belt Channel
GB - 20
To Install The Drive Belt:
IMPORTANT: Be sure the belt seats in idler
and pulley grooves with the idler touching the
back (flat) side of belt.
1. Install the new belt on the transmission
input pulley and idlers, route it through
the belt channel, and then install the belt
on the engine pulley. See Figure 18.
Note belt routing
around idlers.
2. Connect the wheel drive cable spring to
the idler arm as shown in Figure 19, and
then connect the wheel drive cable to
the transmission mount. See Figure 16.
Figure 19
3. Connect the idler return spring to the
idler arm.
Push belt
through belt
channel and
install it on the
engine pulley.
Figure 18