Live transfer
Sets the quality of the image that is transferred from the DVR to the network.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in <Network> window to
move to <Live transfer>, and press [eNteR] button.
The Live Transfer window appears.
2. Use direction buttons (▲▼_ +) to move to a desired item,
and set the value.
• Resolution: Shows the selected network profile's resolution
setting.
• Quality: Shows the selected network profile's image quality
setting.
3. When the live transfer is done, press <OK>.
Live Transfer
CH
Resolution
1
CIF
2
CIF
3
CIF
4
CIF
5
CIF
6
CIF
7
CIF
8
CIF
Previous/Next Page
OK
Cancel
Quality
Low
Low
Low
Low
Low
Low
Low
Low
English _75