Programming For Vcr; Vcr Codes - GE RM24908 Instruction Manual

Programming For VCR

1. Manually turn on the VCR. Find the three digit code for
your VCR in the code list.
2. Press and hold the
CODE SEARCH button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH but-
ton.
3. Press and release the
VCR•DVD button (The
INDICATOR LIGHT will blink
then remain lit.
4. Enter the code using the
Number Buttons. After your
code is entered, the INDICATOR
LIGHT will turn off. If the code
is not valid, the INDICATOR
LIGHT will blink. Check the code
list and repeat process.
5. Aim the remote at your VCR
and press the OFF•ON button.
Your VCR should turn off.
NOTE: If your VCR does not
respond, try all the codes for your
brand. If the codes do not work,
or your brand is not listed, try the
Code Search method, page 10.
6. With your VCR on, press
CHAN+ (CHANNEL UP). If the
VCR responds, no further pro-
gramming is required.
7. Enter your code here for easy
reference.
1
4
7
5
CODE
SEARCH
INDICATOR
LIGHT
VCR
(BLINK)
2 3
5
6
(OFF)
8
9
0
ON•OFF
CHAN +
VCR CODE