Programming For Vcr - GE RM24933 Instruction Manual

Programming For VCR

1. Manually turn
on the VCR.
2. Press and hold
the SETUP button
until the INDICATOR
LIGHT lights, then
release the SETUP
button.
3. Press and release
the VCR button (the
INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for your VCR
in the code list and
enter it using the
Number Buttons.
After your code is
entered, the INDICATOR
5. Aim the remote at
your VCR and press
the ON•OFF button.
Your VCR should turn off.
Note: If your VCR does
not respond, try all
the codes for your
brand. If the codes
do not work, or your
brand is not listed,
try the Code Search
method on page 8.
6. With your VCR on,
press CH+. If the
VCR responds,
no further
programming
is required.
7. Enter your code
here for easy reference.
LIGHT will turn off.
5