Trouble Shooting - GE RM24908 Instruction Manual

Trouble Shooting

PROBLEM
Red light not blinking when
you press any key.
The remote does not operate
your devices.
Not performing commands
properly
Problems programming a TV/
VCR Combo Unit
VCR not responding
Problems changing channels
No response after pressing a
key
Note: Reprogramming may be required after
batteries are removed.
SOLUTION
A) Replace the batteries with 2
new AAA alkaline batteries.
B)Checkifbatteriesareproperly
installed.
A) Try all the codes listed for
your brand.
B) Try the Code Search method.
Start Code Search over again to
locate the proper code for full
compatibility
TrytheVCRcodeforyourbrand.
Some combo units, however,
may require both a TV and VCR
code for full operation.
As a safety feature on your
remote, you must press the REC
button twice.
If your original remote required
ENTER after a channel, press
ENTER after you select a chan-
nel.
A) Make sure you have new bat-
teries and you are aiming your
remote at your device.
B) Check that batteries are prop-
erly installed.
Remote must remain aimed at
television after sleep is set in
order for it to work.
Due to some designs, the origi-
nal remote will only perform
these functions.
11