Programming For Dvd; Dvd Codes; Programming For Dbs; Dbs Codes - GE RM24908 Instruction Manual

Programming For DVD

The DVD codes are programmed using the VCR•DVD key.
CODE LIST

DVD Codes

Aiwa . . . . . . . . . . . . . . . . . . .350
Hitachi . . . . . . . . . . . . . . . . .351
JVC . . . . . . . . . . . . . . . 161, 352
Konka . . . . . . . . . . . . . 353, 354
Magnavox . . . . 162, 356, 357
Mitubishi. . . . . . . . . . . . . . . .163
Panasonic . . . . . . . . . . . . . .355
Philips . . . . . . . . 162, 356, 357

Programming For DBS

1. Manually turn on the DBS. Find the three digit code for your
DBS in the code.
2. Press and hold the
CODE SEARCH button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH but-
ton.
3. Press and release the
DBS•CABLE button (The
INDICATOR LIGHT will blink
then remain lit.
4. Enter the code using the
Number Buttons. After your
code is entered, the INDICATOR
LIGHT will turn off. If the code
is not valid, the INDICATOR
LIGHT will blink. Check the code
list and repeat process.
5. Aim the remote at your DBS
and press the OFF•ON button.
Your DBS should turn off.
6. With your DBS on, press
CHAN+ (CHANNEL UP). If the
satellite system responds, no fur-
ther programming is required.
NOTE: If your DBS does not
respond, try all the codes for your
brand. If the codes do not work,
or your brand is not listed, try the
Code Search method, page 10.
7. Enter your code here for easy
reference.
Pioneer . . . . . . . . . . . . . . . .165
Proscan . . . . . . . . . . . . . . . .160
RCA . . . . . . . . . . . . . . . . . . . .160
Sanyo . . . . . . . . . . . . . . . . . .359
Samsung . . . . . . . . . . . . . . .034
Sony . . . . . . . . . . 166, 360, 361
Toshiba . . . . . . . . 167, 362, 363
Zenith . . . . . . . . . . . . . . . . . .364
1
4
7
SATELLITE CODE
7
CODE
SEARCH
INDICATOR
LIGHT
SAT
(BLINK)
2 3
5
6
(OFF)
8
9
0
ON•OFF
CHAN +