Audio Settings - Pioneer DEH-X6700BS Owner's Manual

Menu Item
PLAY
STOP
OPERATE MODE
[CHANNEL], [REPLAY]
TUNEMIX
[ON], [OFF]
TUNE SCAN
TUNE START
[ON], [OFF]
PARENTAL CTRL
[LOCKED CH]
[CLEAR ALL]
[EDIT CODE]

AUDIO settings

Menu Item
FADER*1*2
BALANCE
16
En
Description
Start playback.
Stop playback.
Assign or buttons to select a channel
or skip backward/skip forward.
Create a music channel that's a blend of songs
made up from the music channels stored on the
current band of presets.
Scan through songs from your music channel
presets.
Start playback of the broadcast from the
beginning of a song when tuning to a preset
music channel.
Lock the currently played channel that contains
mature content.
Unlock all the channels that are restricted to
access.
Change the passcode.
The default passcode is [0000].
Description
Adjust the front and rear speaker balance.
Adjust the left and right speaker balance.
Menu Item
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [80HZ], [250HZ],
[800HZ], [2.5KHZ], [8KHZ]
Equalizer level: [+6] to [–6]
LOUDNESS
[OFF], [LOW], [MID], [HI]
SUB.W*3*4
[NOR], [REV], [OFF]
SUB.W CTRL*3*4*5
Cut-off frequency: [50HZ],
[63HZ], [80HZ], [100HZ], [125HZ],
[160HZ], [200HZ]
Output level: [–24] to [+6]
Slope level: [–12], [–24]
BASS BOOST
[0] to [+6]
HPF SETTING
Cut-off frequency: [OFF], [50HZ],
[63HZ], [80HZ], [100HZ], [125HZ],
[160HZ], [200HZ]
Slope level: [–12], [–24]
SLA
[+4] to [–4]
*1 Not available when [SW] is selected in [REAR-SP] in the INITIAL settings (page 7).
*2 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 7).
Description
Select or customize the equalizer curve.
[CUSTOM1] can be set separately for each source.
However, each of the below combinations are set
to the same setting automatically.
• USB, iPod, PANDORA (iPhone), and APP
(iPhone)
• BT AUDIO, PANDORA (Android), and APP
(Android)
[CUSTOM2] is a shared setting used for all
sources.
Compensate for clear sound at low volume.
Select the subwoofer phase.
Only frequencies lower than those in the
selected range are output from the subwoofer.
Select the bass boost level.
Only frequencies higher than the high-pass filter
(HPF) cutoff are output from the speakers.
Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• USB, iPod, PANDORA (iPhone), and APP
(iPhone)
• BT AUDIO, PANDORA (Android), and APP
(Android)