Front Cover; Parts Replacement Procedure; Removing The; Rear Cover - Canon MF4100 Series Service Manual

Chapter 9

9.3 Parts Replacement Procedure

9.3.1 Front Cover

9.3.1.1 Removing the Front Cover
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
1) Open the paper tray [1].
2) Pull out the paper cover [2], and close the paper tray [1].
3) Open the control panel [1].
4) Open the cartridge cover [2].
5) Remove the front cover [5].
- 2 screws [3]
- 2 claws [4]

9.3.2 Rear Cover

9.3.2.1 Preparation for Removing the Rear Cover

i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
1) Remove the front cover.
2) Remove the right cover.
3) Remove the left cover.
9.3.2.2 Removing the Rear Cover
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
1) Remove the 2 shafts [1], and detach the feeding cover [2].
9-2
F-9-2
F-9-3
0014-6180
2) Remove the rear cover [3].
- 4 screws [1]
- 2 claws [2]

9.3.3 Right Cover

9.3.3.1 Removing the Right Cover

i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
1) Remove the front cover.
2) Unhook the 6 claws [1], and detach the right cover [2].
0014-6183
0014-6184

9.3.4 Left Cover

9.3.4.1 Removing the Left Cover

i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
1) Remove the front over.
2) Close the cartridge cover [1].
3) Remove the 3 screws [2] to remove the damper [3].
F-9-4
F-9-5
F-9-6
0014-6181
0014-6182