Azimuth Jackscrew Assembly; Mount Assembly - Andrew 5.6-Meter ESA Installating And Operation Manual

Azimuth
Jackscrew
Assembly
Step 1
Step 2

Mount Assembly

Step 1
Step 2
Insert 22193/223180 azimuth jackscrew tube into 201287 azimuth pivot assembly as
shown in Figure 29. Insert jack carefully to prevent scratching jackscrew tube. Note:
Ensure jackscrew assembly remains fully retracted at this time.
22193/223180
Apply RTV to flange surface as shown in Figure 29. Fasten jack to pivot using 7/8 x 2-
3/4 in (70 mm) bolts and nuts. Mounting hardware is included with corresponding jack
assembly hardware kit.
Attach shackles to beam assembly as shown in Figure 30.
Lift support legs to azimuth beam assembly.
Figure 29
Figure 30
25
Installation Procedures