Andrew 5.6-Meter ESA Installating And Operation Manual page 20

Step 7
Attach second 201488 outrigger plate to 201487 panning frame assembly as shown in
Figure 19.
•
Use 7/8 x 2-1/4 in (57 mm) hardware
•
Insert bolts from inside assembly to outrigger plate
Step 8
Attach 201407 elevation axis assembly to 201487 panning frame assembly and 201295
joint assemblies as shown in Figures 20 and 21.
•
Use 7/8 x 2-1/4 in (57 mm) hardware
•
Insert bolts from elevation axis assembly to panning frame assembly and joint assem-
bly
Figure 19
Figure 20
20
Installation Procedures