Mode Setting - Janome MEMORYCRAFT 300E Instruction Book

Designs
Hoop Size A(F): 126
1 2
5 6
Mode
Screen Contrast
(3)
5
(4)
Eco Mode
10
min
(5)
inch/mm
Register
110mm
X
3 4
A Z
7 8
Edit
+
+
inch mm

Mode Setting

Pressing the SET key will open the mode setting
window.
(1) SET key
Press the SET key to customize the machine
settings.
(2) Flag key (Language selection key)
Press the flag key to select the language for the
screen display. You can select one of 11
languages.
(3) Screen contrast
The visual touch screen contrast can be adjusted.
Press the plus
contrast.
Press the minus
contrast.
(4) Sound control
The buzzer volume can be adjusted. The volume
level can be set from (0 to 10) and the default
setting is 5.
Press the plus
volume.
(1)
Press the minus
volume.
When you select 0 the buzzer turns off.
(5) Eco mode
After turning on the power switch, if you have not
used the machine, after a while, the machine will
SET
enter Eco Mode. The visual touch screen will go
dark and the sewing light will turn off.
Whenever you touch the screen while the machine
is in Eco mode, the screen and sewing light will
turn on again.
You can set the Eco mode timer from 1 minute to
30 minutes. The default setting is 10 minutes.
To set the Eco Mode timer:
Press the plus
Press the minus
To turn off the Eco mode, Press the plus
(2)
"OFF" shows in the box.
21
key, to sharpen the screen
key, to fade the screen
key, to increase the buzzer
key, to decrease the buzzer
key to increase the timer setting.
key to decrease the timer setting.
key until