Additional Information; General Setup Information - Sony SLV-D910AZ Service Manual

Example C
TV
Other VCR (Player)
PERITEL
PERITEL cable (not supplied)
: Signal flow
How to connect to a stereo system
Connect the LINE-2 IN t/o L/R jacks on this DVD-VCR to the audio output jacks on the
stereo system, using an audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
• When you connect another VCR to the LINE-3 or LINE-2 connector, press INPUT SELECT
to display "L3" or "L2" in the display window.
108
Editing

Additional Information

General setup information

Changing setup options
1
Press SET UP when the DVD player is in stop
SET UP
mode, then press V/v to select
(OPTION) and press ENTER.
ENTER
2
Press V/v to select "Réglages Utilisateur",
then press ENTER.
ENTER
The "REGLAGES UTILISATEUR" menu
appears.
3
Press V/v to select the option to change.
ENTER
110
General setup information
Your VCR (Recorder)
LINE-3
SET UP
V/v/B/b
ENTER
OPTION
Langue :Français
L'horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
Messages Ecran
[ Oui ]
V v
ENTER RETURN SET UP
REGLAGES UTILISATEUR
Syst. Couleur [ Auto ]
NICAM [ Oui ]
Smart Trilogic [ Oui ]
Etendre ShowView [ Non ]
V v B b RETURN SET UP
1-26
Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or
LP.
• Press SELECT VIDEO to control the
VCR.
1
Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR. Search
for the point to start recording and press X to set it to playback pause.
3 Press z REC on this VCR to set it to recording pause.
REC
4 To start editing, press the X (pause) buttons on both VCRs at the same time.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X on this VCR when an unwanted scene
begins. When it ends, press X again to resume recording.
4
Press B/b to change the setting.
ENTER
5
Press SET UP to exit the menu.
SET UP
Menu choices
Initial settings are indicated in bold print.
Menu option Set this option to
Syst. Couleur • "Auto" to select the colour system automatically.
• "PAL" to use the tape recorded in the PAL colour system.
• "SECAM" to use the tape recorded in the SECAM colour
system.
• "MESECAM" to use the tape recorded in the MESECAM
colour system.
• "B/W" to use the tape recorded in black and white.
When using the tape recorded NTSC colour signals:
• "NTPB" to play back an NTSC-recorded tape on PAL TV.
• "NT4.43" to play back an NTSC-recorded tape on Multi TV.
NICAM • "Oui" to record NICAM broadcasts on the hi-fi audio track.
• "Non" to record standard sound on the hi-fi audio track.
For details, see page 98.
Smart Trilogic • "Oui" to automatically adjust the sharpness of the picture.
• "Non" to manually adjust the sharpness of the picture.
Etendre ShowView • "Non" to deactivate the ShowView Extend function.
• 10/20/30/.../60 (minutes) to extend the time of the ShowView
setting by the selected amount of time.
X x z REC
109
Editing
111
General setup information