Ricoh B264 Service Manual page 246

SERVICE CALL CONDITIONS
Pattern Error
1-13-2
1-14-1 Booklet jogger
motor
1-14-2
Front stapler
1-15-1
motor
1-15-2
1-16-1 Rear stapler
motor
1-16-2
1-17-1 Folder plate
motor error
1-17-2
1-17-3
1-17-4
1-18-1 Connector
1-18-2
B264/B265
Status
After the shutter guide motor turns on to
return the shutter guide to its home
position, the shutter guide HP sensor
does not activate within 1s.
After the booklet jogger motor turns on
to move the booklet jogger plate from
its home position, the booklet jogger HP
sensor does not deactivate within 0.5s.
After the booklet jogger motor turns on
to return the booklet jogger plate to its
home position, the booklet jogger HP
sensor does not activate within 1s.
The front staple hammer HP switch
does not turn off within 0.5s after the
front stapler motor turns on.
The front staple hammer HP switch
does not turn on within 0.5s after the
front stapler motor turns on during jam
recovery.
The rear staple hammer HP switch
does not turn off within 0.5s after the
rear stapler motor turns on.
The rear staple hammer HP switch
does not turn on within 0.5s after the
rear stapler motor turns on during jam
recovery.
After the folder plate motor turns on to
return the folder plate to its home
position, the folder plate HP sensor
does not activate within 0.3s.
After the folder plate motor turns on to
move the folder plate from its home
position, the folder plate HP sensor
does not deactivate within 0.3s.
After the folder plate motor turns on to
return the folder plate to its home
position, the folder plate return sensor
does not deactivate within 0.3s.
The pulse count from the folder plate
motor sensor is lower than the target
minimum.
The connector of the shutter guide HP
sensor is not connected.
The connector of the folder plate HP
sensor is not connected.
4-18
Possible Cause
• Shutter guide HP
sensor defective
• Booklet jogger
motor defective
• Booklet jogger HP
sensor defective
• Front stapler motor
defective
• Front staple
hammer HP
switch defective
•
• Rear stapler motor
defective
• Rear staple
hammer HP
switch defective
• Folder plate motor
defective
• Folder plate HP
sensor defective
• Folder plate return
sensor defective
• Folder plate motor
sensor defective
• Poor connection or
no connection of
the shutter guide
HP sensor
connector
SM