DFI-ITOX LR101 SERIES User Manual page 82

3
BIOS Setup
3. Press <Enter> to confirm the new password.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
4. When the Password Installed dialog box appears, click OK.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then press <En-
ter>. The Password Uninstalled dialog box will appear.
If you forgot the password, you can clear the password by erasing the CMOS
RTC (Real Time Clock) RAM using the Clear CMOS jumper. Refer to the Jump-
er Settings section in chapter 2 for more information.
82
BIOS SETUP UTILITY
: Not Installed
: Not Installed
Confirm New Password
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
: Not Installed
: Not Installed
Password Installed
[OK]
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Security
Install or Change the
password.
← →
Select Screen
Select Item
↑↓
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security
Install or Change the
password.
← →
Select Screen
Select Item
↑↓
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit