Super Io Configuration; Serial Port2 Mode - DFI-ITOX LR101 SERIES User Manual

3
BIOS Setup

Super IO Configuration

This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
Configure Super IO Chipset
Serial Port1 Address
Serial Port2 Address

Serial Port2 Mode

PWRON After PWR-Fail
W83627DHG.WDT Time
Serial Port1 Address and Serial Port2 Address
Auto
Automatically selects a base address for the COM port.
3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4
Selects the COM port's base address.
Disabled
Disables the COM port.
Serial Port2 Mode
COM port functions as a serial port or IrDA. You cannot use both at the same
time.
Normal
Sets the COM port to serial port mode.
IrDA
Sets the COM port to IrDA mode.
ASK IR
Sets the COM port to ASK IR mode.
64
BIOS SETUP UTILITY
Advanced
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
[Off]
[000]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Allows BIOS to select
Serial Port 1 Base
Addresses.
← →
Select Screen
Select Item
↑↓
Change Option
+ -
F1 General Help
F10 Save and Exit
ESC Exit