DFI-ITOX LR101 SERIES User Manual page 10

Table of Contents

Advertisement

1
Introduction
S3 Graphics
Multiple Displays
Audio
LAN
Serial ATA
Rear Panel I/O
Ports
10
• S3 Graphics Chrome
• 500MHz core clock
• Four DDR2 512Mbit 32Mx16 memory
• Display ports: 2 DVI-I and 1 HDMI
- Does not support multiple displays using HDMI and 2
DVI-I at the same time. For dual display, use the bottom
DVI-I with either the top DVI-I or HDMI.
• 64-bit memory bus width
• Dual rank 256MB maximum memory
• H.264/AVC - MPEG-4 Advanced Video Coding (AVC) hard-
ware acceleration
• VC1 hardware acceleration based on SMPTE 421M and its
derivative standards
• ChromotionHD 2.0 Programmable Video Engine
• DX10.1 Unified Shader Architecture - Shader Model 4.1
• Supports 4 displays
- VGA + LVDS + Bottom DVI-I + Top DVI-I
or
- VGA + LVDS + Bottom DVI-I + HDMI
• Realtek ALC262 2-channel High Definition Audio
• High performance DACs with 100dB SNR
• ADCs with 90dB SNR
• Two stereo DACs support 24-bit PCM format for stereo au-
dio playback
• Three stereo ADCs support 20-bit PCM format for multiple
input streaming
• S/PDIF input/output interface
• Realtek RTL8111DL PCI Express Gigabit Ethernet controller
• Integrated 10/100/1000 transceiver
• Supports Full Duplex flow control (IEEE 802.3x)
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports power down / link down power saving
• Supports 3 SATA (Serial ATA) interfaces which are compliant
with SATA 1.0 specification
• SATA speed up to 3Gb/s
• 1 DC-in 12V jack
• 2 DVI-I ports (1 shared with HDMI port)
• 1 DB-15 VGA port
• 1 HDMI port
• 1 RJ45 LAN port
• 6 USB 2.0/1.1 ports
• Mic-in, line-in and line-out
435 ULP
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lr101-b16dLr101-b16s

Table of Contents