Table of Contents
Advertisement
AHCI For F6 During Windows Setup Floppy Driver
You need to prepare an AHCI driver floppy diskette that you will need when you
install the AHCI driver during Windows XP installation.
1. Click "AHCI For F6 Dur-
ing Windows Setup Floppy
Driver" on the main menu.
Windows Explorer will ap-
pear showing the locations
of the installation files.
2. Click the Edit menu then
click "Select All".
3. Insert a blank formatted
floppy diskette into a floppy
disk drive.
4. Right click on the files,
select "Send To" and then
select "3½ Floppy (A:)".
The system will copy the
selected files into the dis-
kette.
Supported Software
4
135
Advertisement
Table of Contents
