DeWalt DW870 Instruction Manual page 10

DW870,220/383823 5/3/02 1:29 PM
Procedure For Permanent Mounting
1. Drill four holes, 5/16" diameter minimum, through the work
surface (Fig. 8).
2. Remove screws from feet.
3. Insert 1/4-20 screws through underside of work surface, through
feet, into holes in tool base. The proper screw length is equal to
the thickness of the
(25 mm).
Cradle Mounting (Fig. 9)
1. Cut two boards 20" long x 2" - 3" high x 4" wide.
2. Place chop saw at desired work location.
3. Place boards tightly along side, and nail to work surface
(Fig. 9).
Important!
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (including brush inspection and
replacement) should be performed by authorized service centers or
other qualified service organizations, always using identical
replacement parts.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. A
complete listing of service centers is located at the end of this
manual If you need assistance in locating any accessory for your
tool, please contact your local dealer or authorized service center.
CAUTION: The use of any other accessory not recommended
for use with this tool could be hazardous.
CAUTION: Recommended saw blades for your saw are in this
Page 6
work surface plus 1 inch
manual. The use of any other accessory or attachment may be
hazardous. Use only D WALT 14", 4100 RPM saw blades.
E
ALWAYS WEAR SAFETY GLASSES. SECURE WORK IN VISE.
DISCONNECT TOOL FROM POWER SUPPLY BEFORE
CHANGING WHEEL.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year
E
from date of purchase. We will repair, without charge, any defects
due to faulty materials or workmanship. Arrangements have been
made with the Industrial Tool Division of Black & Decker (U.S.)
Inc. to provide warranty repairs for D
the complete unit, transportation prepaid, to any Black & Decker
(U.S.) Inc. Industrial service center or authorized service station
listed under "Tools, Electric" in the yellow pages. This warranty
does not apply to accessories or damage caused where repairs
have been made or attempted by others. This warranty gives you
specific legal rights and you may have other rights which vary
from state to state.
In addition to the warranty, D WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the
E
participating seller within 30 days for a full refund. Please return the
complete unit, transportation prepaid. Proof of purchase may be
required.
6
WALT tools. Please return
E