Table of Contents
Advertisement
No.
Component
1
Port LED's
2
Reset
Button
3
USB Port
Description
These port selection push buttons each contain 2 LEDs.
•
An orange LED indicates that a computer is connected to the corresponding
port.
•
A green LED indicates that the computer connected to the corresponding
port has focus.
•
Simultaneously pressing port LEDs 1 & 2 resets the console keyboard and
mouse.
•
Simultaneously pressing port LEDs 15 & 16 on the GCS1716 starts Auto
Scan mode. See F7: SCAN
Pressing this button performs a system reset. When the system is reset, the
GCS1716 beeps, and then the KVM port LEDs flash in succession until the reset
is completed. After the reset is complete, you can login again.
Note: This button is semi-recessed and must be pushed with a small object,
such as the end of a paper clip or a thin ballpoint pen.
USB peripherals (flash drive, CD-ROM, etc.) plug into this port.
11
Hide quick links:
Advertisement
Table of Contents
