Making A Recording; Recording On A Tape Or Md Deck Or Vcr - Technics SA-DA20 Operating Instructions Manual

A
TAPE MONITOR
1
INPUT SELECTOR
2
VCR 2
VCR 3
B
TAPE MONITOR
1 2
Note
¡You cannot record a source connected through a digital terminal.
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analogue terminals ( \ pages 6, 7)
and "ANALOG" input is selected ( \ page 18).
¡When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
A
You can record to equipment connected to TAPE/MD REC (OUT)
or to a VCR connected to VCR 1 OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
When recording with a tape or MD deck, you can record any source
except TAPE/MD.
When recording with a VCR, you can record any source except
TAPE/MD or VCR 1.
1
2
3
4
B
It is possible to check the sound being recorded if your tape deck is
a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
Press [TAPE MONITOR] once again to turn it off.

Making a recording

Recording on a tape or MD deck
or VCR
Turn [INPUT SELECTOR] to select the
source to be recorded.
If you selected "VCR 2" in step 1, set
[l VCR 2, k VCR 3] to the required
position.
Begin recording.
Follow your recording unit's operating instructions.
Begin the source to be recorded.
Follow your equipment's operating instructions.
To monitor sound being recorded onto a tape deck
27
RQT5861