Return Material Authorization (Rma); Damaged Parts - CYBEX VR3 Chest Press Owner's And Service Manual

Return Material Authorization (RMA)

The Return Material Authorization (RMA) system outlines the procedures to follow when returning
material for placement, repair or credit. The system assures that returned materials are properly handled and analyzed.
Follow the following procedures carefully.
Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from
Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper
RMA and an Automated Return Service (ARS) label.
1. Call the Customer Service Hot Line listed above for the return of any item that is defective.
2. Provide the technician with a detailed description of the problem you are having or the defect
in the item you wish to return.
3. Provide the model and serial number of your Cybex equipment.
4. At Cybex's discretion, the technician may request that you return the problem part(s) to Cybex
for evaluation and repair or replacement. The technician will assign you a RMA number and
will send you an ARS label. The ARS label and the RMA numbers must be clearly displayed on
the outside of the package that contains the item(s) to be returned. Include the description of
the problem, the serial number of the equipment and the name and address of the owner in the
package along with the part(s).
5. Forward the package through UPS to Cybex.
Attn: Customer Service Department
Cybex International, Inc.
1975 24th Ave SW
Owatonna, MN 55060
NOTE: Merchandise returned without an RMA number on the outside of the package or shipments sent COD will not
be accepted by the Cybex receiving department.

Damaged Parts

Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier
(UPS, Federal Express, trucking companies, etc.)
Apparent Damage - Upon receipt of your shipment, check all items carefully. Any damage seen with a visual check
must be noted on the freight bill and signed by the carrier's agent. Failure to do so will result in the carriers refusal to
honor your damage claim. The carrier will provide you with the required forms for fi ling such claims.
Concealed Damage - Damage not seen with a visual check upon receipt of a shipment but
notices later must be reported to the carrier as soon as possible. Upon discovery of the
damage, a written or phone request to the carrier asking them to perform an inspection of the materials must be made
within ten days of the delivery date. Keep all shipping containers and packing materials as they will be needed in the
inspection process. The carrier will provide you with an inspection report and the necessary forms for fi ling a concealed
damage claim. Concealed damage claim is the carrier's responsibility.
Customer
Service
Page 3-2
Cybex VR3 12001 Chest Press Owner's Manual