Panasonic Lumix DMC-TZ37EC Service Manual page 55

10.3.2.2. How to Adjustment the Electronic Leveller
<Preparation>
• Download the leveller adjustment chart "ACC_Adjustment_Chart.pdf" from the Web site and print in A3 size.
• Fix the leveller adjustment chart to the wall or panel using thumbtacks and drop a thread with weight. (Fig.3-15)
Attach it to the wall or panel in that condition and remove the thread with weight.
• Attach the camera main unit to a tripod.
<Adjustment Procedure>
1. Place the camera main unit horizontally and keep the distance of 25 cm between the leveller adjustment chart and camera
main unit.
Set up the camera so that the optical axis of the lens intersects the center of the leveller adjustment chart at a right angle
(Fig.3-16)
1.1.) Adjust the height of the tripod so that the center of the leveller adjustment chart coincides with the height of the camera
lens.
1.2.) Put a triangle ruler at the center of the leveller adjustment chart, and then adjust so that the center of the camera lens
comes on the horizontal line.
1.3.) Adjust so that the leveller adjustment chart comes out on the full LCD screen.
1.4.) Make fine adjustment so that the side bar indication of the leveller adjustment chart appears horizontally on the LCD
screen and the cross shape guide indication of LCD of camera overlaps on the center. (Fig.3-17)
2. Press the shutter button.
→ "Green " is displayed on the LCD. → Press the shutter button.
3. Rotate the camera at a 90-degree angle so that the grip faces upward with the camera attached to the tripod, and set up in the
same way as above 1). (Fig.3-18)
4. Press the shutter button.
→ "Green " is displayed on the LCD. → Press the shutter button.
5. Rotate the camera at a 90-degree angle so that the grip faces downward with the camera attached to the tripod, and set up in
the same way as above 1). (Fig.3-19)
6. Press the shutter button.
→ "Green " is displayed on the LCD. → Press the shutter button.
→ When "OK" is displayed, adjustment is complete.
55