Table of Contents
Advertisement
• Step 4. Display the "INITIAL SETTINGS" menu:
Note: If the unit is other than PROGRAM AE mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "INITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
There are four kinds of menu from as follows:
[Except for "DMC-TZ40EG, EF, EB, EP, GA, ZS30GK, TZ41, TZ37 and ZS27" models : (VEK0U05 is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, all of the model suffix are displayed as follows. (Four pages in total)
[Only for "DMC-TZ40EG, EF, EB, EP, GA and TZ41" models : (VEK0U06 is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, only 8 model suffix are displayed as follows. (Two pages in total)
To display the "TZ41" model suffix, choose the "EG" area and press the DELETE button.
[Only for "DMC-TZ37" models : (VEK0U09 is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, the following model suffix are displayed as follows. (Two pages in total)
[Only for "DMC-ZS27 and ZS30GK" models : (VEK0U10 is used as a Main P.C.B.)]
When Main P.C.B. has been replaced, the following model suffix are displayed as follows. (Four pages in total)
13
Advertisement
Table of Contents
