Table of Contents
Advertisement
E- Mail Address
SMTP Server
Apply
IP Inform ation
IP Address
Subnet Mask
Gatew ay
DNS Server
Video Port
Web Port
Apply
Camera Inform ation
Set up the E- Mail account as the receiver for the snapshot
picture.
Specify the SMTP mail server for sending E- Mail.
When you finish the " E-Mail Setting", click "Apply".
Enter an unused IP Address w ithin the IP address range used on
your LAN. If the IP Address of your LAN is from the 192.168.2.0
to 192.168.2.250, you can set an unused IP Address from the
range for the camera, for example: 192.168.2.250.
The Subnet Mask field must match the subnet setting on your
LAN. For example: 255.255.255.0.
The Gatew ay is used to forw ard frames to destinations in a
different subnet on the Internet. The Gatew ay setting must be the
same w ith the gatew ay used by the PCs on your LAN.
DNS Server (Domain Name Server) that translates names to IP
addresses. Set the same DNS Server as the PCs on your LAN.
The Video Port is used to transmit or receive the video streaming
in the netw ork. The default port setting is "4321". If you w ant to
view the video from the camera, the port setting should be
correct.
This camera support w eb connection, the default w eb port is 80.
Since the w eb server may use port 80, you can use a different
port for the camera. If you change the w eb port from 80 to 8080,
you must type
http://192.168.2.3:8080
through the w eb browser.
When you finish the "IP Information", click "Apply".
47
to connect the camera
Advertisement
Table of Contents
