Edimax 802.11g User Manual page 29

Setting Wizard
IP Address
Subnet Mask
Gatew ay
Video Port
Cancel
Finish
When you finish the camera setting, you can click "Ok" to run the " Camera View er"
immediately or click " Cancel" to run the " Camera View er" later.
The w izard will auto setup an available IP Address to the camera.
For example: if the IP address of the netw ork is 192.168.2.x, the
wizard will search an unused IP Address from 192.168.2.250 to
192.168.2.0 and assign the camera an available IP Address.
You are allow ed to enter another IP Address to change the
setting.
The w izard will auto search the Subnet Mask setting of the
netw ork and set the camera in the same Subnet Mask.
You can enter another Subnet Mask to change the setting.
The w izard will auto search the Gatew ay setting of the netw ork
and set the camera to use the same Gatew ay.
You can enter another Gatew ay to change the setting.
It defines the video stream port. The default value is "4321".
Click "Cancel" to stop w i z ard setting.
Click "Finish" to complete the camera setting.
26