ZyXEL Communications Prestige 100 User Manual page 54

Figure 4-2 Menu 4 - Internet Access Setup
1. From the Main Menu, enter '4' to go to 'Menu 4 - Internet
2. ISP's Name - Enter the name of your Internet Service
3. ISP IP Addr - Enter the IP Address of the remote gateway at
4. Pri(mary) Phone # and Sec(ondary) Phone Number - Both
5. My Login Name - Enter the login name given to you by your
42 Configuring for Internet Access
Access Setup' as seen above.
Provider, e.g., myisp. This information is for identification
purposes only.
the ISP's site. If you don't have this data, just leave it blank.
the Primary and the Secondary Phone number refer to the
number that the Prestige will dial to connect to the ISP. The
Prestige will always call your ISP using the Primary Phone
number first. If the Primary Phone number is busy or does not
answer, the Prestige will call the Secondary Phone number if
available. Once connected, the Prestige will use the BACP
(Bandwidth Allocation Control Protocol) to establish the
second B-channel if PPP/MP is enabled, and the ISP also
supports MP and BACP.
ISP.