Vii. Comfort Adjustments - Pride Mobility Maxima SC900 Owner's Manual

V I I . C O M F O R T A D J U S T M E N T S
SEATBACK ADJUSTMENT
The seatback may be positioned to four different
angles: 90°, 100°, 102° and 105°. See figure 12.
To adjust the seatback angle:
1. Loosen and remove the adjustment screws from
the seatback hinge on both sides of the seat.
2. Reposition the seatback to the desired angle.
3. Align the adjustment holes from the upper and
lower hinge, so the adjustment screw can easily
pass through.
4. Reinsert both adjustment screws and tighten.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights.
See figure 13.
1. Remove the seat and rear shroud from your
scooter. See IX. "Disassembly and Assembly."
2. Loosen the nut and remove it from the bolt, and
remove the bolt and washers from the lower
seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
match up the holes in the upper seat post with
those of the lower seat post.
5 Reinstall the bolt, washers and nut to secure the
seat post.
NOTE: Ensure both washers have been rein-
stalled before fully tightening the nut.
6. Reinstall the rear shroud and the seat.
Maxima
UPPER HINGE
100° ADJUSTMENT HOLE
ADJUSTMENT SCREW
102° ADJUSTMENT HOLE
105° ADJUSTMENT HOLE
90° ADJUSTMENT HOLE
LOWER HINGE
Figure 12. Seatback Hinge
WASHER
NUT
Figure 13. Seat Height Adjustment
www.pridemobility.com
UPPER SEAT POST
WASHER
BOLT
LOWER SEAT POST
27