ZXR10 Command Manual (Voice and Video Service Volume)
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
32
Confidential and Proprietary Information of ZTE CORPORATION
enable
disable
This example describes how to enable the IPTV control function.
ZXR10(config)#nas
ZXR10(config-nas)#iptv control enable
show iptv control
iptv control login-time
Use this command to set the minimum time for identifying a user.
NAS configuration
iptv control login-time <login-time>
<login-time>
If the preview time is less than the minimum identification time,
the preview count will not be counted.
This example describes how to set the minimum identification time
to 10s.
ZXR10(config)#nas
ZXR10(config-nas)#iptv control login-time 10
iptv control prvcount count
Use this command to set the global maximum preview count.
NAS configuration
iptv control prvcount count <preview-count>
<preview-count>
The global maximum preview count serves as the maximum pre-
view count of the CAC rule by default.
This example describes how to set the global maximum preview
count to 20.
ZXR10(config)#nas
ZXR10(config-nas)#iptv control prvcount count 20
Enables the IPTV control function.
Disables the IPTV control function.
The minimum time for identifying a user, in
the range of 1~4294967295, in unit of second
Global maximum preview count, in the range
of 0~65535, in unit of seconds.