Using The Remote Commander To Change Service Data - Sony KDF-46E2000 Service Manual

2-4. USING THE REMOTE COMMANDER TO
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
Item Number Data Value
Category
VERSION
Adjustment
VERS
Item
F/A: 00000000 00000000
CBA: 00000000 00000000
1. Access Service Adjustment Mode and select the Service Menu that
contains the Category with the Adjustment Item you want to change.
2. To change the Category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the
Service Menu displayed. To change a Category on one of the other
Service Menus, press the JUMP button until the correct Service
Menu is displayed.
3. To change the Adjustment Item, press 1 or 4 on the Remote
Commander.
4. To change the Data Value, press 3 or 6 on the Remote
Commander.
Note: To go back to the last saved Data Value, press 0 then ENT
on the Remote Commander to read the memory.
5. To save the changes, press MUTING then ENT to write into
memory.
6. To exit service mode, turn the power off by pressing POWER .
Wait 2 minutes before restarting the set to allow the fans to
completely shut down or the Service Menu will appear on the screen.
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
Service
0 0 SERVICE
Wide Zoom Video 1
Menu
WSL: 480I
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
TV/VIDEO
BD/DVD
Display 1
Next Item
Display
2
Next Category
JUMP
Display 4
SURROUND
Previous Item
Displays JUMP
Service Menus
PREV
VISUAL SEARCH
MUTING
MUTING
Writes data
into memory
REC
TOP MENU MENU
SLEEP POWER TV POWER
DVR/VCR SAT/CABLE TV
FUNCTION Increase
3
Data Value
6
Decrease
Data Value
ENT
ANT FREEZE
MODE 5 Display
WIDE
SOUND PICTURE
Previous
Category
ENT
0
MENU
Reads data
REPLAY ADVANCE NEXT
from last
saved NVM
PLAY
PAUSE STOP
VOL
CH
REC PAUSE REC STOP
BD/DVD
F1 F2
TV
RM-YD010
50