Section 1: Disassembly; Overview - Sony KDF-46E2000 Service Manual

KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010

SECTION 1: DISASSEMBLY

1-1. OVERVIEW

TOOLS NEEDED
Long Phillips Screwdriver
Needle Nose Pliers
Small Flathead Screwdriver or Jewelers Screwdriver
The connectors in the MIX5 chassis have been redesigned to ensure they are securely fasten to the boards. Please review the
illustrations below.
Use caution not to rock the Type 2 or Type 3 connectors when removing or reinstalling to avoid breaking the solder leads off the
Printed Circuit Boards.
TYPE 3
TYPE 1
TYPE 2
LIFT ONE SIDE AT A TIME
SQUEEZE LOCKING TAB
SQUEEZE DOWN ON
BY PUSHING TAB IN WITH
TOWARDS CONNECTOR
TAB TO RELEASE
SMALL SCREWDRIVER
BEFORE PULLING FREE
CAUTION! IF THE TYPE 2 FEMALE
CONNECTOR HAS A SLOT (AS SHOWN)
MAKE SURE THE LOCK TAB SEATS INSIDE
THIS SLOT.
14
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010